Monthly Archives: February 2014

Fanatic Progress with New Growbed Additions! – Part 3 of 3


finished-beds_01AQUAPONIC SUCCESS!!!

The day has finally arrived, I have my FULL AP up and running!!! Whoo hoooooo!!!! 🙂

Originally, the plan was for 6 months from start to finish… well… almost made it 😉

1 year and 11 months later, my full AP grow space is now complete… WHEW!!! Not that I’m one to say anything is ever completely over.. its the journey, not the destination right?…  Right!?!?!

finished-beds_02
Anyhoo, the final two beds have been built, lined, leveled, plumbed and now filled with rock media. This last little bit is great exercise by the way 😉

I was able to determine that for the last 2 grow beds, I was gonna need roughly 1.2 tons of cinder/lava rock to fill those beds. Now originally I thought about having this delivered, but as with all things, there was a monkey wrench in that plan, they informed me that because this is the start of the busy season, I would not get my rock delivered till Monday! Whaaaa!?!?!

Well, as you can guess, that will just not do! A man with a plan (along with a 1 year delay) is not going to stand for another delay of 3 days! I will be at work, I cannot wait till the following weekend.. so I made an effort to take the old pick up truck and haul the last of my material myself.

finished-beds_03Now let me just say, 1.2 tons in the bed of a 1/2 ton pickup that is 35 years old is an experience! I NEVER went over 35 miles per hour, because the drop in my rear was quite impressive, let me tell you! 😉

Still, the old girl did herself justice and got the rock media home without bottoming out, a flat, the bed disintegrating, the tail gate busting open and spilling its content, etc. etc. She came through with flying colors and I love that old beast even more as a result!

finished-beds_04Once home, grabbed the wheel barrel and started shoveling it out of the bed, into the WB and hauling it to the beds. This took all of close to 4 hours from start to finish, but it was work well done, the beds are filled, the siphons are doing their jobs and now the fish tank is a nice rusty Kool Aid 😉

This is of course normal. Had this happen when I got the first two beds installed. Eventually the sediment will settle and the water will clear naturally.

In order to accommodate the additional flow needed for the beds, I had to completely shut off my excess ‘pressure valve’ completely. Normally I was using this to aerate the water in the tank, but now with 4 beds siphoning off at random, there is more than enough water returning to the tank via the 4 inch pipe at any given time to keep things properly oxygenated. Although, I am considering adding a DIY Venturi to the pressure valve. The reason is mainly because I like projects. With the main system completed its now time to give considerations to the finer details 😉

finished-beds_05As mentioned before in Part 2, I am planning on replacing the hoop house with a Pergola. A materials plan is in the works and I plan on posting updates with regards to that as well as the Venturi and the addition of a swirl filter to the mix.

Lots of plans, lots of ideas, and plenty of motivation!

Stay tuned!

Advertisements

Fanatic Progress with New Growbed Additions! – Part 2 of 3


ap-beds-build-01Ohhhhh… the good times, the just keep a comin! 😉

I was able to make some fantastic progress this weekend. Got the new grow beds lined, plumbed and did an initial fill of the beds to check for leaks and to make sure the siphon’s were doing their job. All in all, aside from a few extra trips to the hardware store for some missing parts, some sore muscles and finding that I was a bit short on the lava rock to fill the beds completely, this weekend went by without much incident.

ap-beds-build-02Next weekend I’ll have the additional lava rock shipped and added to the beds (what lava rock I did have on hand was good enough to fill about 2/3rds of just 1 bed). I’m also planning on taking on the next stage of my AP build, which will be to replace the hoop house with a pergola. The first stage of this little endeavor will be to start first with a bit of re-organizing some of the 1″ rip rap that I used to create a flooring for the AP. I’m going to start by shortening the width of the existing rock base by about 3-4 feet. Originally I had though I would be building a total of 8 grow beds, as I’ve found, 4 is going to be more than adequate for me needs. So I’m going to move the base that would’ve been under the other 4 beds and use that to surround my fish tank.

ap-beds-build-02-2The reason for this is simple, 1. it gives a more aesthetic look to the tank, 2. it helps complete the tie in with the grow beds and 3. I normally need to top off my tank about 2-4 barrels a month. Sometimes, I step away to grab some other material, I forget I’m filling the barrel and it spills over, creating a lovely mud pit that my dog loves to trample around it. So that’s gotta go!

beds-filling_02The base will also work to tie in with the new Pergola that I’m planning on building to replace the hoop house, which will look a bazillion times better!

The hoop was always going to be a temporary structure, and it has served its use and well, but it iss a bit of an eyesore. Ultimately, the backyard is in need of a total revamp. The Aquaponics ‘Greenhouse’ was always meant to serve as a strong focal point to the north of the yard.. so now that the AP build is nearing completion, it is time to work on the other elements that will tie in with it.. starting with the Pergola.

For those not familiar with Pergola’s, I’ve got a few I can show you that give you some idea of what I’m looking to do.

Till the next update! beds-filling_02

ap-beds-build-05ap-beds-build-04  ap-beds-build-03beds-filling_01beds-filling_02

Fanatic Progress with the New Growbed Additions! – Part 1 of 3


02-2014_04I had been planning on expanding my overall system for a while now.. I’m glad to say that progress is FINALLY being made on that front.

The new growbeds will effectively double my overall systems grow area to about 96SF from the original 48SF. For a family of 2, this will be more than adequate 😉

The new beds are to the east of my current ones and have finally been moved on to the support blocks and leveled. My next step will be to get the liner inserted, creation of two additional siphons and then finishing up on the plumbing. Due to the grading of the yard, the new beds will be roughly 6 inches higher than the first two. This works to my benefit as the output pipe needs to maintain a good angle to get the outflow back to the fish tank.

The fish seem to be doing well. Switched up to Goldfish after my first batch of Talapia died due to a parasite in the system (my best guess). Overall, the system has been performing splendidly! It has fully matured and can be readily seen with the strong growth going on in the first two beds.

I’ve been supplementing the system every two weeks with Seaweed extract to make sure extra nutrients are getting to the plants. I started doing this about 6 weeks back after seeing that my peas were looking a little on the ‘pasty’ side. So far, the Seaweed appears to be working quite well 🙂

New plans are in the works to start in on a worm farm and creating my own ‘Worm Tea’ to help replace the Seaweed extract. I did add in worms to my growbeds and they are munching away happily, so I’m going to see about grabbing a few more and trying to raise a bit of my own. This will also double in the creation of worm castings to be added in later via some wicking beds that I’d like to use for root based veggies like carrots, yams, potatoes, etc.

02-2014_03 02-2014_02 02-2014_01

02-2014_06 02-2014_05