Covering the Aquaponics Greenhouse – Lets Get Warm Again!
For this edition of the build, it will come in two parts. This first part was essentially to get the shade cloth down and the opaque solar film up. Unfortunately I did this a bit too late with the recent cold snap and so some plants were lost due to frost. As this year is essentially a trial run of learning the ropes of AP, I’m now realizing what times of the year are best to make the transition from Summer to Winter. Obviously waiting till January was missing the ball by a fairly long shot. Totally on me 😦
So for this weekends project, got my buddy John over to my place (cause believe me you don’t want to tackle covering a greenhouse all by your lonesome) and we knocked out getting the sides attached with the film. As you can see the end frames are still needing to be trimmed up and attached properly, hence Part 2 😉
But for now, with the film secured from being blown off by
the wind and getting it tightened down fairly good, I should be able to get the end frames wrapped up by next weekend, while still being able to take advantage of the solar thermal properties of the film being put in place.
That point was proven about an hour after we had placed the film and got it cut to length. My friend John and I went inside and you could immediately notice a significant increase in temperature from the outside air. Today
(Sunday) marks the first FULL day the film will be in place and I’m interested in seeing how well it will help to keep the water temperature up a bit for the fish.
As I’ve got other items on my plate for today, getting this post up is the next best thing to getting those end frames complete (which will come next weekend, so stay tuned for that update).
Posted on January 13, 2013, in Aquaponics, Get Motivated, Greenhouse, Inspiration, Solar, Talapia and tagged agriculture, aquaponic, aquaponics, aquaponics greenhouse, garden, gardening, greenhouse, Talapia. Bookmark the permalink. 2 Comments.